Materials used in this product: Mouse over the thumbnails to view the materials used in this product.   Check other Available Materials

• Maple
• White Oak
• Merbau

Matching products :Click on thumbnails below to view enlarged pictures

•   P10

General Information

WOOD BORDERS INSTALLATION INSTRUCTIONS

Minimum wood floor border order is 21 ln.ft, in 3 ln.ft increments.

Unless specified, all wood borders are supplied at an overall 3/4" thickness.

You may specify an alternate overall thickness. All wood borders have square edge(no bevel), straight cut(no grooves), glue-down installation only.

Adhesive Recommendations: For medallions and borders installation Czar Floors recommends Bostik © 1100FS glue.
A fast curing, one-part, cartridge/gun applied, moisture cure urethane adhesive that does not contain water or chlorinated solvents, is V.O.C. Compliant and has no ozone depleting chemicals.
The glue is available from Czar Floors. You may add the glue to your order or purchase separately online. A pair of latex gloves is already included with every item.
All standard products are unfinished.

Please note that on-screen colors are not necessarily precise representations of actual product colors due to variance in monitor calibrations. Due to natural variations, actual product appearance may vary slightly from images shown.

Colors, materials, designs and prices subject to change without notice.