P40 Wood Floor Medallion
This unusual medallion is attractive and tender.
Materials used in this product:
Matching products :Click on thumbnails below to view enlarged pictures
P40 Wood Floor Medallion specification:
Unless noted otherwise in the description all standard wood medallions supplied per the following specification:
- Unfinished. Wood Medallions can be prefinished for an additional 10% charge. Standard finish is high quality water based polyurethane, semi-gloss.
- Wood top layer is glued on plywood backer. Larger, over 60" medallions are not glued but supplied separately as face-taped wood layer and plywood backer to be glued on-site.
- Plain Sawn wood
- Standard thickness is 3/4". You may request custom thickness for inlay from 5/16" to 3/4".
Up to 60" in size wood floor medallion can be made as a single piece. Larger inlays supplied in precisely fit segments.
Review Wood Medallions Installation Instruction.
FREE ROUTER BIT, TEMPLATE IS INCLUDED WITH EVERY WOOD FLOOR MEDALLION.
Adhesive Recommendations:For medallions and borders installation Czar Floors recommends Bostik © Best glue.
A fast curing, one-part, cartridge/gun applied, moisture cure urethane adhesive that does not contain water or chlorinated solvents, is V.O.C. compliant and has no ozone depleting chemicals. The glue is available from Czar Floors. You may add the glue to your order or purchase separately online.
- Medallions up to 30 inches use 1 glue cartridge
- Medallions 36 to 48 inches use 2 cartridges
- Medallions 60 and 70 inches use 3 cartridges
- Borders use about 1 cartridge per 10 lin.ft.
Additional installation and maintenance supply can be purchased on-line.
Design Your Room using On-Line Floor Designer.
After building your floor plan, you can estimate your project cost and share it through e-mail, all from within your browsers-no extra software required.
For simple floor area and material quantity estimate use Floor Calculator.
Please note that on-screen colors are not necessarily precise representations of actual product colors due to variance in monitor calibrations. Due to natural variations, actual product appearance may vary slightly from images shown.
Colors, materials, designs and prices subject to change without notice.