B4 Wood Floor Border
Materials used in this product:
B4 Wood Floor Border specification:
Unless noted otherwise in the description, all standard wood borders supplied per the following specification:
- Unfinished. Wood borders can be prefinished for an additional 10% charge. The standard finish is high-quality water-based polyurethane, semi-gloss.
- Constructed in two ways: More intricate designs are made with wood top layer glued on plywood backer. Geometrical designs are made of solid wood, face-taped.
- Square edge(no bevel)
- Straight cut(no Tongue and Groove - T&G)
- Plain Sawn wood
- The standard thickness is 3/4". You may request custom thickness for inlay from 5/16" to 3/4".
Borders are sold by lineal foot in 3 ft. increments. The minimum wood floor border order is 21 ln.ft. Each border corner block is sold for the price of one lineal foot unless noted otherwise.
Wood Borders can be used to define a specific area. Borders are handcrafted in the species combinations shown on this page or one of your own specifications.
Floor borders are pre-assembled modules that can be glued-down to any level, clean, dry and sound sub-floor.
Review WOOD BORDERS INSTALLATION INSTRUCTIONS
Adhesive Recommendations: For medallions and borders installation Czar Floors recommends Bostik © Best glue.
Fast curing, one-part cartridge/gun applied, moisture cure urethane adhesive that does not contain water or chlorinated solvents, is V.O.C. compliant, and has no ozone-depleting chemicals. The glue is available from Czar Floors. You may add the glue to your order or purchase separately online.
- Medallions up to 30 inches, use one glue cartridge.
- Medallions 36 to 48 inches, use two cartridges
- Medallions 60 and 70 inches, use three cartridges
- Borders use about one cartridge per 10 lin.ft.
Additional installation and maintenance supplies can be purchased on-line.
Design Your Room using On-Line Floor Designer.
After building your floor plan, you can estimate your project cost and share it through e-mail, all from within your browsers-no extra software required.
For simple floor area and material quantity estimate use Floor Calculator.
Please note that on-screen colors are not necessarily precise representations of actual product colors due to variance in monitor calibrations. Due to natural variations, actual product appearance may vary slightly from images shown.
Colors, materials, designs and prices subject to change without notice.